Get the Best Color From Your Rimage System
Whether you use a Rimage Everest printer or a Rimage inkjet system, there is a rich variety of color that your printer can produce. If you have ever tried to match a very specific color or have gotten an unexpected result when trying to print a certain label though, you may wonder what you should do to get the finished product you desire.
The first thing to understand is that both the Everest and inkjet printers use the Cyan-Magenta-Yellow (CMY) spectrum. The printers use those three base colors in different quantities to produce the wide variety of colors they can print. This is different from your computer monitor that is used to design the label and pick the colors in the first place. Computer monitors use the Red-Green-Blue (RGB) spectrum. While the printer driver is designed to translate RGB colors from the computer into CMY colors for printing, this difference is why the printed result may not match the color on the screen.
The second important note is that color science is complicated. If you are interested in the science details, see the Rimage website for an in-depth white paper “The Science of Color” that goes into the details of color, CMY vs RGB differences, and how it impacts disc production.
There are a few options to try tweaking the color results that a printer is producing. If you’re using CD Designer, one method is to use the Image Processing options on a specific graphic file and then adjust the Contrast, Brightness, Hue and Saturation. These options adjust the difference between light and dark areas of the print, overall darkness and lightness, base color, and amount of color. This can be done per image so you do not impact images that are already printing correctly.
Another option is to adjust the printer driver settings. This impacts all discs and the entire label, so it should only be used if this is acceptable. The first driver setting is the Color Matching. This changes the way the driver translates the label color into the CMY spectrum. The desired setting can vary depending on the color and label file, so experimenting is encouraged. The second setting is the Image Adjustments. These can produce some dramatic effects, but using the Custom option allows for subtler changes.
It is also possible to adjust hardware to help with color matching. Calibrating your monitor used to design labels can make it easier to know what color will be printed prior to testing the print. If a printer is serviced in the field, it might also be necessary to balance the color of the printer as well. Rimage technicians will perform color balancing when a printer is brought in for repair.
While each of these tasks is simple, this document can’t provide all the details for your exact Computergate system. The good news is Computergate Support is available to assist. Either at http://www.computergate.co.nz/index.php/support/, e-mail to firstname.lastname@example.org or by phone
Australia-1300 137 585 / New Zealand 0800 886 077 / Asia– 800 852 3860 , trained technicians can answer questions or provide additional guidance on any of these tasks.